*Electric Current: 600mA.
*Length of the Cable: 7.0 feet; Cable diameter: 3.5 mm.
IC(34063): Wide voltage operation range, operation from 3.0 V to 40 V Input; Low Standby Current, the output current have the function of restricting loading and over loading protection, it will avoid the damage to the mobile phone or charger; Output Switch Current is high to 1.5 A, you can adjust the output voltage (in 5V-12V); Frequency operation is high to 100 kHz, the inside base reference voltage is precision 2%.
Interior components and the PCB mainboard are all made of SGS environment protection material.
If you use LG-VX8550 car charger when your phone is on off mode, though it has no charging signal to show(in fact the car charger is charging normally) , you should push the switch key for about 5 second, then the charging signal will appear. If you use LG-VX8550 car charger when your phone is on open mode, the charging signal will appear normally.
LG: AX275, AX380, AX565, CB630 (Invision), CE110, CU515, CU575, CU720, CU920, GT365 (Neon), KE970, LX150, LX160, LX260, LX570, MG800C, VX10000, VX5400, VX8350, VX8500, VX8550, VX8600, VX8700, VX8800, VX9400, VX9900,
UTSTARCOM: G'zOne Boulder,